Product Filter

Epe

Filter
  • EPE Standard Bladder Accumulator (AS-0.7-P-330-CG01) Read more

    EPE Standard Bladder Accumulator (AS-0.7-P-330-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-10-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-10-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-15-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-15-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-20-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-20-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-25-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-25-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-35-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-35-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-5-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-5-P-360-CG01)

    A hydro-pneumatic accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

  • EPE Standard Bladder Accumulator (AS-55-P-360-CG01) Read more

    EPE Standard Bladder Accumulator (AS-55-P-360-CG01)

    Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
    A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
    precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
    A potential energy is now stored in the accumulator to be utilized whenever needed.

    Specifications
    Material of Construction
    Body : Carbon Steel / Stainless Steel.
    Bladder : Nitrile(NBR) / Butyl (IIR) /
    Viton (FKM) / EPDM ….
    others listed on ordering code.
    Connections
    Gas Side : 5/8” UNF / 1/4” BSP /
    5/16” UNEF/Vg8 / 7/8” UNF.
    Others on request.
    Fluid Side : Female Threaded or
    Flanged. Others on request.
    Paint-CS Accumulators : Externally painted in RAL-5010.
    Others on request.

Shopping Cart

Product Filter

Product Enquiry

Scroll to Top

Fill below form and avail the best offers!!

PopUp Form